Home  /  Products  /  Three Zone Thermal Shock
ENV-04-2

Three Zone Thermal Shock Test Chamber

Hot, cold and ambient zones in one chamber for full thermal shock profile execution including dwell at room temperature. Specimen remains stationary while air is switched.

Hot +200 / Cold -73 / Ambient Stationary specimen <10 s transition
Request Quote → View All Products
Three Zone Thermal Shock
Overview

Purpose & Application

The ENV-04-2 three-zone thermal shock chamber holds specimens stationary in a single test compartment while pre-conditioned hot, cold and ambient air streams are sequentially diverted into the workspace. This eliminates mechanical specimen transfer and gives the highest test throughput for IEC 60068-2-14 Test Nb and MIL-STD-810 Method 503 thermal shock procedures.

Standard Models

Available Sizes

ModelWorkspace (H x W x D)Static LoadThermal LoadShelves
ENV-04-2-125 Liters50 x 50 x 50 cm10 Kg20 W1
ENV-04-2-450 Liters75 x 75 x 80 cm25 Kg50 W2
ENV-04-2-1000 Liters100 x 100 x 100 cm50 Kg100 W2
ENV-04-2-CBCustom BuiltSpecifySpecifySpecify

We have delivered Hot Cold & Humidity Chambers up to 10 x 4.5 x 3.5 metres.

Technical Specifications

Key Specifications

Hot Zone
+50 degC to +200 degC
Cold Zone
-73 degC to +0 degC
Ambient Zone
Room temperature pre-conditioned
Air Switch Time
Less than 10 seconds
Control Accuracy
+/-0.5 degC each zone
Programmer
PLC-HMI with multi-segment recipes
Construction
SS 304 / CRCA, insulated dampers
Standards
IEC 60068-2-14 Test Nb, MIL-STD-810 Method 503
Standard Features

Built-in Capabilities

  • Stationary specimen in single test compartment
  • Motorised insulated dampers route air from each zone
  • Hot, cold and ambient zone independent control
  • PLC-HMI multi-segment program control
  • Cascade refrigeration on cold zone
  • Observation window with internal illumination
  • Caster wheels on models up to 1000 litres
  • Optional data logger and NABL calibration
Safety Systems

Protection & Reliability

  • Independent over- and under-temperature protection
  • Motor winding over-temperature protection on semi-sealed compressors
  • High-discharge / low-suction pressure correction before tripping
  • Compressor trip on abnormal pressure conditions
  • Over-current relays (OLR) and MCBs as required
  • Audio-visual alarm for critical functions
Request a Quote

Configure Your Chamber

Tell us your testing requirements and we'll design a chamber tailored to your specifications. Our engineers respond within 24 hours.

1. Model Code & Variant
2. Specifications
3. Configuration & Add-ons
4. Your Details

By submitting, you'll receive a tailored quotation from our engineering team within 24 hours. We respect your privacy and never share your information.