DAMP HEAT CHAMBER - MODEL: TROPICAL
BASIC MODELS - Table-1
Model TROPICAL- S: Steady state Humidity Testing
Model TROPICAL- HC: Steady state Hot Cold & Humidity Testing
Model TROPICAL- C: Cyclic Humidity Testing (Kindly suggest standard)
Model TROPICAL- D: Steady state Low Temperature – Low Humidity Testing
Note: Please refer our HAST chamber specifications for high humidity test at more than 100 C temperature.
Temperature, Humidity & Dew Point Range for Various Models:
- TROPICAL-S
Temperature: 200 C to 800 C
Relative Humidity: 20% to 95 % Rh
Dew Point Temperature: 200 C to 600 C
- TROPICAL-HC
Only Hot Cold & Humidity Test: Any temperature between -730 C to + 2000 C (Kindly Specify)
- TROPICAL-C
Various standards are suggesting humidity cycling tests. Temperature and Humidity will be maintained as suggested in standards.
- TROPICAL-D
Temperature: 50 C to 500 C
Relative Humidity: 5% to 30% Rh
Lower Dew Point Temperature: -250 C
Standard Features:
- % Rh sensing by capacitive RH sensor
- Control accuracy: Better than +/- 0.5° C and +/- 3 % RH
- Average heating and cooling rate from ambient: 1° C/min
- Standard Port Holes: 50 mm / 100 mm / 150 mm diameter (Specify)
- Observation window with illumination
- Caster wheel for PRINCE, QUEEN and KING models
- Ambient condition: 10° to 40° C (specify lower or higher ambient temperature than specified)
- Humidity Generation: Using low pressure steam generation
- Dehumidification System:
- Refrigeration System used except model TROPICAL-D
- Desiccant technology is used in Model TROPICAL-D
